HWF024QT Styroplast Quart by Hot Wire Foam Factory
HWF024QT Styroplast Quart by Hot Wire Foam Factory
- Available
- Out of stock
- Pre order
Regular price
$63.81 USD
Regular price
$65.98 USD
Sale price
$63.81 USD
Unit price
per
Shipping calculated at checkout.
Couldn't load pickup availability
HWF024QT Styroplast Quart by Hot Wire Foam Factory
Whether you are producing signage or protecting delicate forms for themed scenery, Styroplast will outperform all other coatings. Styroplast is a two component system, one part ISO to three parts poly by volume, slow cure polyurethane coating.
- A Brush-on encapsulant with fast set time that is designed to provide an impact and fire resistant shell for numerous substrates including EPS/Styrofoam, insulative foams, and wood. Can be sprayed too, but spray-on polyurethane coatings require expensive spray equipment and a self contained breathing apparatus.
- Very little weight is added to the foam structure reducing the need for structural support. Water resistant and chemically inert once cured, it is human and animal safe. Spray in mold or as a surface coating.
- Superior hardness, fast cycle time, easy to apply, lightweight and short cure time. Environmentally safe, no VOCs.
- Superior hardness and greater moisture resistance than epoxies.
Hot Wire Foam Factory Styroplast is a batch mixed coating applied most commonly by brush or trowel that has been found to have the following applications:
- Impact resistant coating for the protection of easily deformable substrates such as EPS and insulative foams.
- Structural plastic for use in part fabrication where only a moderate level of impact resistance is required.
- Plastic coating which may be textured to splash protect foam, drywall, wood or other architectural substrates from many common liquids.
- Structural for foam sculptures
- Gap or crack filler
- Waterproof encapsulating material
- Coverage per gallon depends on thickness
1/32in thick, 51.3 sq/ft
1/16in thick, 25.6 sq/ft
1/8in thick, 12.8 sq/ft
1/4in thick, 6.4 sq/ft
- Color: Neutral (tan)
Toxicity: ISO Component contains isocyanate (the ISO side is has similar health hazards as Gorilla glue). When spraying, fresh air supply, gloves, and protective clothing is required during application. When brushing, ventilation, gloves and protective clothing is required during application.
Shelf Life: The shelf is twelve months for Part B and six months for Part A. They will last longer than that when stored properly. The ISO, when left open will absorb moisture out of the humid air and cause bubbles. The container should be closed when not taking some out.
Whether you are producing signage or protecting delicate forms for themed scenery, Styroplast will outperform all other coatings. Styroplast is a two component system, one part ISO to three parts poly by volume, slow cure polyurethane coating.
- A Brush-on encapsulant with fast set time that is designed to provide an impact and fire resistant shell for numerous substrates including EPS/Styrofoam, insulative foams, and wood. Can be sprayed too, but spray-on polyurethane coatings require expensive spray equipment and a self contained breathing apparatus.
- Very little weight is added to the foam structure reducing the need for structural support. Water resistant and chemically inert once cured, it is human and animal safe. Spray in mold or as a surface coating.
- Superior hardness, fast cycle time, easy to apply, lightweight and short cure time. Environmentally safe, no VOCs.
- Superior hardness and greater moisture resistance than epoxies.
Hot Wire Foam Factory Styroplast is a batch mixed coating applied most commonly by brush or trowel that has been found to have the following applications:
- Impact resistant coating for the protection of easily deformable substrates such as EPS and insulative foams.
- Structural plastic for use in part fabrication where only a moderate level of impact resistance is required.
- Plastic coating which may be textured to splash protect foam, drywall, wood or other architectural substrates from many common liquids.
- Structural for foam sculptures
- Gap or crack filler
- Waterproof encapsulating material
- Coverage per gallon depends on thickness
1/32in thick, 51.3 sq/ft
1/16in thick, 25.6 sq/ft
1/8in thick, 12.8 sq/ft
1/4in thick, 6.4 sq/ft
- Color: Neutral (tan)
Toxicity: ISO Component contains isocyanate (the ISO side is has similar health hazards as Gorilla glue). When spraying, fresh air supply, gloves, and protective clothing is required during application. When brushing, ventilation, gloves and protective clothing is required during application.
Shelf Life: The shelf is twelve months for Part B and six months for Part A. They will last longer than that when stored properly. The ISO, when left open will absorb moisture out of the humid air and cause bubbles. The container should be closed when not taking some out.